Plumbing is an important aspect of any building, whether it’s a residential, commercial or industrial structure. It involves the installation and maintenance of various plumbing systems such as water supply, drainage, and sewage systems. As such, skilled plumbers are in high demand not just locally but also globally.
Also read: TESDA Warehousing Services Courses
TESDA offers three levels of Plumbing courses under the Philippine TVET Qualification Framework – NC I, NC II, NC III and Plumbing NC II Online Course. These courses aim to provide individuals with the necessary skills and knowledge to become competent plumbers.
Benefits
Here are some benefits of completing the TESDA Plumbing Courses:
- Enhanced knowledge and skills in plumbing installation, repair, and maintenance.
- Opportunities for employment both locally and internationally.
- Higher chance of promotion and career advancement in the plumbing industry.
- Professional recognition through certification from TESDA.
- Competitive salary and compensation as a certified plumber.
Plumbing NC I
The Plumbing NC I course teaches you how to install basic plumbing units like a water meter, toilet, sink, shower with a water heater, and kitchen sink. You’ll also learn how to install floor drains and faucets.
Units of Competency
This course consists of the following Units of Competency:
Basic Competencies
- Receive and respond to workplace communication
- Work with others
- Demonstrate work values
- Practice housekeeping procedures
Common Competencies
- Prepare construction materials and tools
- Observe procedures, specifications, and manuals of instruction
- Perform mensuration and calculations
- Maintain tools and equipment
Core Competencies
- Prepare Plumbing Layout
- Make Piping Joints and Connections
- Perform Minor Construction Work
- Install and Assemble Single Plumbing Unit
Career Opportunity
A person with this course is competent to be a:
- Plumber I
Training Duration
- 28 Hours (Basic)
- 20 Hours (Common)
- 120 Hours (Core)
Total: 168 Hours
Qualifications
This section outlines the qualifications of trainees, which include:
- At least a Junior High School education (Grades 9 & 10) or graduation
- Ability to perform basic math calculations
- Ability to communicate both orally and in writing
Plumbing NC II
The Plumbing NC II course teaches skills for installing and maintaining plumbing systems, including hot and cold water lines, in medium-rise buildings.
Units of Competency
This course consists of the following Units of Competency:
BASIC COMPETENCIES
- Participate in workplace communication
- Work in a team environment
- Practice career professionalism
- Practice occupational health and safety procedures
COMMON COMPETENCIES
- Prepare construction materials and tools
- Observe procedures, specifications and manuals of instruction
- Perform mensuration and calculations
- Maintain tools and equipment
CORE COMPETENCIES
- Prepare estimation of materials for multiple plumbing units
- Perform multiple plumbing unit installations and assemblies
- Conduct pipe leak testing
- Perform plumbing repair and maintenance work
Career Opportunity
A person with this course is competent to be a:
- Plumber II
Training Duration
- Basic: 18 hours
- Common: 24 hours
- Core: 160 hours
Total: 202 hours
Qualifications
This section details the prerequisites for trainees, encompassing their educational background and professional experience. The requirements are as follows:
- Minimum of Senior High School (Grade 11 & 12) level or graduate.
- Holder of Plumbing NC I certification or relevant industry experience (plumbing works) for a minimum of 2 years* in the following areas:
- Preparation of Plumbing Layout
- Making Piping Joints and Connections
- Performing Minor Construction Works
- Installing and Assembling a Single Plumbing Unit
Note: *Certification must be provided by the employer or a Registered Master Plumber.
In addition to these technical requirements, the trainees should possess the following skills:
- Effective oral and written communication abilities.
- Proficiency in basic mathematical computations.
Please note that this list does not include specific institutional requirements such as a written entrance exam, which may be mandated by the school or training center offering the TVET program.
Plumbing NC II Online Course
The Plumbing NC II Online Course by TESDA Online Program provides essential plumbing skills with a flexible curriculum covering installation, maintenance, and technical drawing. Ideal for beginners and professionals, it offers learning at your own pace.
Modules
There are 5 modules in this online course, each with specific units and lessons that cover essential topics related to the plumbing industry. Let’s take a closer look at each module:
Module 1: Introduction to Plumbing
UNIT 1: The Plumbing Industry
- Lesson 1: Plumbing Industry
- Lesson 2: Maintaining Personal and Professional Qualities as Plumber
- Lesson 3: Practicing Occupational Health and Safety Procedures in Plumbing
Upon completion of this unit, you will possess the necessary skills to:
- Identify the importance of plumbing as a profession;
- Apply proper workplace etiquette and professionalism; and
- Perform and identify occupational safety procedures in a working environment.
Unit 2: Fundamentals of Plumbing
- Lesson 1: Plumbing Materials and Fixtures
- Lesson 2: Common Tools and Equipment Used in Plumbing System
- Lesson 3: Requisition of Materials and Tools
- Lesson 4: Mensuration and Calculation
Upon completion of this unit, you will possess the necessary skills to:
- Identify the uses of different plumbing tools, materials, equipment, and fixtures;
- Create a request form for appropriate tools and materials;
- Demonstrate receiving and inspecting tools and materials;
- Perform basic maintenance and storing of plumbing tools and equipment;
- Carry out mensuration and calculation
Module 2: Performing Multiple Plumbing Units Installation and Assembly
Unit 1: Preparing for Multiple Plumbing Installation and Assembly
- Lesson 1: Drain, Waste, and Vent System
- Lesson 2: Water Supply and Distribution System (Hot and Cold)
- Lesson 3: Storm Drainage System
- Lesson 4: Kitchen Waste and Drainage System
Upon completion of this unit, you will possess the necessary skills to:
- Discuss and review the Laws and Regulations related to plumbing installation
- Differentiate Orthographic drawing and Isometric drawing
- Interpret Orthographic Drawing and Isometric Drawing of Drain, Waste, and Vent (DWV) and Water supply system
- Draw Orthographic Drawing and Isometric Drawings of the Drain, Waste, and Vent (DWV) and Water supply system
Unit 2: Installing of Pipes, Fittings, and Fixtures
- Lesson 1: Joining or Connecting Methods
- Lesson 2: Installing Sanitary, Waste, and Vent System
- Lesson 3: Installing Water Supply and Distribution System
- Lesson 4: Installing Plumbing Fixtures and Accessories
Upon completion of this unit, you will possess the necessary skills to:
- Identify different types of plumbing installation
- Demonstrate different connecting methods for pipes and fittings
- Demonstrate installation of the sanitary system and water supply
- Install different plumbing fixtures
Module 3: Performing Plumbing Repair and Maintenance Work
Unit 1: Repair Defective Pipes, Fittings, and Plumbing Fixtures
- Lesson 1: Replacement of Sanitary Pipes and Fittings
- Lesson 2: Replacement of Water Lines and Fittings
- Lesson 3: Replacement of Plumbing Fixtures
Upon completion of this unit, you will possess the necessary skills to:
- Discuss the importance of plumbing repair and maintenance work;
- Demonstrate replacement of drain/waste pipes and fittings;
- Perform Replacement of water lines and fittings; and
- Demonstrate replacement of different plumbing fixtures.
Unit 2: Clear Clogged Drain, Waste, and Vent Pipes and Fittings and Plumbing Fixtures
- Lesson 1: Tools and Equipment in Declogging of Drainage, Waste, and Vent (DWV) Pipes and Fittings
- Lesson 2: De-clogging of DWV Pipes and Fittings and Plumbing Fixtures
Upon completion of this unit, you will possess the necessary skills to:
- Identify appropriate tools and equipment for de-clogging sanitary pipes and drains;
- Demonstrate proper use of tools and equipment in de-clogging sanitary pipes and drains;
- Examine different causes of clogged sanitary pipes and drains;
- Perform proper ways of de-clogging sanitary pipes and drains.
Module 4: Preparing Estimation of Materials for Multiple Plumbing Units
Unit 1: Introduction to Plumbing Plan the job requirement.
- Lesson 1: Basic Drawings and Plans
- Lesson 2: Plumbing Legends, Symbols, and Abbreviations
Upon completion of this unit, you will possess the necessary skills to:
- Identify different plumbing blueprints
- Read plumbing plans according to job requirements
- Interpret plumbing symbols and abbreviations
Unit 2: Estimating Unit Cost and Material Take-off
- Lesson 1: Material Cost Estimates
- Lesson 2: Labor Cost Estimates
Upon completion of this unit, you will possess the necessary skills to:
- Explain the importance of computing cost estimates and material take-offs
- Compute cost estimates and material take-offs in accordance with the job requirements
- Analyze labor cost estimates in accordance with
Module 5: Preparing Estimation of Materials for Multiple Plumbing Units
Unit 1: Introduction to Plumbing Plan the job requirement.
- Lesson 1: Basic Drawings and Plans
- Lesson 2: Plumbing Legends, Symbols, and Abbreviations
Upon completion of this unit, you will possess the necessary skills to:
- Identify different plumbing blueprints
- Read plumbing plans according to job requirements
- Interpret plumbing symbols and abbreviations
Unit 2: Estimating Unit Cost and Material Take-off
- Lesson 1: Material Cost Estimates
- Lesson 2: Labor Cost Estimates
Upon completion of this unit, you will possess the necessary skills to:
- Explain the importance of computing cost estimates and material take-offs
- Compute cost estimates and material take-offs in accordance with the job requirements
- Analyze labor cost estimates in accordance with
Note: Upon completion of each module, or specific modules, you will be awarded a certificate to recognize your achievements and demonstrate your expertise in the respective subject matter. These certificates serve as a testament to your dedication and commitment to continuous learning.
Plumbing NC III
The Plumbing NC III course teaches skills needed to install both simple and complex plumbing systems, including water heaters for high-rise buildings. It also covers leadership and teamwork.
Units of Competency
This course consists of the following Units of Competency:
Basic Competencies
- Lead workplace communication
- Lead small teams
- Develop and practice negotiation skills
- Solve problems related to work activities
- Use Mathematical concepts and techniques
- Use relevant technologies
Common Competencies
- Prepare construction materials and tools
- Observe procedures, specifications and manuals of instruction
- Interpret technical drawings and plans
- Perform mensurations and calculations
- Maintain tools and equipment
Core Competencies
- Install centralized hot, chilled and/or potable water piping system
- Install riser/downfeed and distribution water supply system
- Install and connect pumps to plumbing system
- Perform finishing and trimming of plumbing
Career Opportunity
A person with this course is competent to be a:
- Plumber III
Training Duration
- 24 hours (Basic)
- 24 hours (Common)
- 200 hours (Core)
Total: 248 hours
Also read: Full List of TESDA NC2 / NC II Courses
Qualifications
This section specifies the qualifications of trainees, including their education and experience:
- At least a Grade 12 graduate.
- Holder of a National Certificate for Plumbing NC II or relevant industry experience in plumbing works for a minimum of 3 years* in all of the following:
- Prepare estimation of materials for a single plumbing unit.
- Perform complex plumbing installation and assemblies.
- Conduct pipe leak testing.
- Perform plumbing repair and maintenance works.
Note: Certified by the employer or a Registered Plumber.
- Ability to communicate orally and in writing.
This list does not include specific institutional requirements such as written entrance exams and others that may be required by the school or training center delivering the TVET program.
Sample of Certificate of Completion
Requirements
To enroll, students will need the following documents:
- PSA Birth Certificate
- High School or College Diploma
- Certified True Copy of Official Transcript of Records or Form 137
- Certificate of Good Moral Character or GMRC
- 1 x 1 and/or 2 x 2 pictures
To obtain further details, please reach out to the enrollment site that aligns with your requirements. Kindly note that the criteria may vary.
Summary
The Plumbing NC courses provide necessary skills and knowledge for individuals to work as plumbers in various types of buildings. With proper training and experience, one can advance their career from a Plumber I to a Plumber III. The duration and qualifications for each course may differ, but they all require basic math skills, communication abilities, and physical dexterity. Enrolling in these programs can lead to promising career opportunities in the plumbing industry.
Contact Information
Technical Education and Skills Development Authority (TESDA)
Office Address: BLDG 8, TESDA Gate 2, TESDA Complex, East Service Rd., South Superhighway, Taguig, Metro Manila.
Email Address: contactcenter@tesda.gov.ph
Telephone Number: 8887-7777
SMS Hotline: 0917-479-4370 (text only)
Website: https://www.tesda.gov.ph/
Facebook Page: https://www.facebook.com/TESDAOfficial
