Tips

The Building Wiring Installation NC II course offered by TESDA teaches the knowledge, skills, and attitude needed for electrical installation. It covers housekeeping practices and safety measures, guiding students to master building wiring technicalities for safe and effective electrical installations.

Also read: TESDA Consumer Electronics Servicing NC II Course

This course emphasizes good housekeeping and safety, equipping learners with technical expertise while fostering responsibility and precision. Participants learn industry best practices, regulations compliance, and safety prioritization in building wiring installations. This course is an important foundation for those aiming for a career in the electrical industry, preparing them to contribute effectively to sector growth and development.

Course Description

This course covers knowledge, skills, and attitude in electrical installation, emphasizing good housekeeping and safety practices.

Benefits

• Acquisition of Essential Skills: The course provides a comprehensive understanding of electrical installation, including installing, maintaining, and commissioning electrical wiring.
• Improved Job Opportunities: TESDA certification enhances job prospects in electrical installation and maintenance.
• Hands-On Training: The course offers practical experience for students to apply their learning in real-world scenarios.
• Safety Training: Safety is crucial when working with electrical installations. The course includes good housekeeping and safety practices to help students work safely and effectively.
• Enhancing Critical Thinking and Problem-Solving: The course fosters these skills, valuable not just in electrical installation but also in life’s diverse areas.

Units of Competency

BASIC COMPETENCIES

• Participating in workplace communication
• Working in a team environment
• Practicing career professionalism
• Practicing occupational health and safety procedures

COMMON COMPETENCIES

• Preparing construction materials and tools
• Observing procedures, specifications and manuals of instructions
• Interpret technical drawings and plans
• Performing mensuration and calculation
• Maintaining tools and equipment

CORE COMPETENCIES

• Prepare electrical power and hydraulic tools
• Perform roughing-in activities for communication and distribution
• Install wiring devices for floor and ground fault current interrupting outlets
• Install electrical protection system for lighting and grounding
• Install electrical lighting systems on auxiliary outlets and lighting fixtures
• Install communication, signaling devices and remote control systems on electrical and auxiliary equipment
• Perform commissioning electrical system

Sample of Certificate of Completion

Training Duration

• Basic: 18 hours
• Common: 24 hours
• Core: 360 hours

Total: 402 hours

Also read: TESDA Automotive Wiring Harness NC II Course

Qualifications

To take this course, individuals must have the following:

• Able to communicate
• Good moral character
• Physically and mentally fit

Requirements

To enroll in the TESDA Biomedical Equipment Servicing NC II Course, you will need the following documents:

• PSA Birth Certificate
• High School or College Diploma
• Certified True Copy of Official Transcript of Records or Form 137
• Certificate of Good Moral Character or GMRC
• 1 x 1 and/or 2 x 2 pictures

For more information, please reach out to the enrollment site that best suits your specific needs. Kindly note that the specific criteria may vary.

Trainer Qualifications

The instructor/trainer for this course must have the following qualifications:

• Completed Training Methodology II (TM II)
• Have at least a National Certificate Level III in Building Wiring Installation or equivalent
• Demonstrate good moral character
• Possess CSC Professional eligibility (for government positions) or an appropriate professional license issued by the PRC
• Proficient in computer skills
• Physically and mentally fit
• *1 year of relevant industry experience and/or teaching experience

These qualifications should be met by the instructor/trainer to ensure an effective delivery of lessons and successful training of students.

 Frequently Asked Questions

1. Who can take the Building Wiring Installation NC II Course?

A: This course is open to individuals who have completed basic education and meet specific qualifications such as good moral character and physical and mental fitness.

2. How long does it take to complete this course?

A: The total duration of the course is 402 hours, broken down into basic (18 hours), common (24 hours), and core (360 hours) competencies.

3. Are there any specific requirements for enrollment?

A: Yes, individuals must have certain documents such as birth certificate, diploma, and good moral character certificate. These requirements may vary depending on the specific enrollment site.

4. Is there any hands-on training included in this course?

A: Yes, the course provides hands-on experience for students to apply their learning in real-world scenarios. This practical training is important for developing skills and ensuring safety when working with electrical installations.

5. How does TESDA certification benefit individuals who complete this course?

A: TESDA certification enhances job prospects in electrical installation and maintenance, providing opportunities for career growth and development in the industry. It is also recognized by employers and can serve as a foundation for further education and training in the field.

6. What other skills can learners develop from this course?

A: Apart from technical skills, learners can also improve their communication, teamwork, and problem-solving abilities through this course, making them more valuable employees in any industry.

Summary

The Building Wiring Installation NC II Course offers an excellent foundation for a career in the electrical industry. It equips learners with essential skills, improves job opportunities, and fosters critical thinking and problem-solving abilities. The course covers basic, common, and core competencies and has a total duration of 402 hours. To enroll, individuals must meet qualifications such as good moral character and physical and mental fitness, while trainers must possess relevant qualifications like Teaching Methodology II training and industry experience.

TESDA offers specialized Electronics Operations courses designed to equip individuals with the skills needed to thrive in the electronics industry. These programs focus on training participants to perform key tasks in both back-end and front-of-line (FOL) operations, ensuring they are prepared to contribute effectively to electronics production lines. With these qualifications, learners gain hands-on experience and knowledge in setting up workplaces, monitoring operations, and ensuring quality compliance.

Also read: TESDA Electric Power Distribution Operation and Maintenance Courses

The Electronics Back-end Operations NC II qualification prepares individuals to handle back-end production processes, while the Electronics Front-of-Line (FOL) Operations NC II focuses on front-line production tasks. Both courses are tailored to meet the industry’s demand for skilled workers capable of maintaining efficiency and quality in electronics manufacturing. These programs are ideal for anyone aiming to build a career in the fast-growing electronics sector.

Benefits

Here are some of the benefits of taking TESDA Electronics Operations courses:

• Develop Technical Skills: TESDA Electronics Operations courses help participants build essential skills for back-end and front-of-line electronics work, boosting employability and job opportunities.
• Hands-on Training: Participants gain practical experience in setting up and monitoring electronics production lines, preparing them for real-world challenges.
• Industry-Recognized Certifications: Completing these courses earns certifications that validate skills and enhance competitiveness in the job market.
• Career Advancement: Advanced qualifications like NC III and IV offer opportunities for higher-level skills and career growth.
• Job Opportunities: With the growing electronics industry, these courses open doors to local and international roles in back-end and front-of-line operations.

Electronics Back-end Operation NC II

The Electronics Back-end Operations NC II qualification trains individuals to work in electronics production. It includes setting up workspaces, performing and monitoring operations, and ensuring quality compliance.

Units of Competency

The units of competency comprising this qualification include the following:

Basic Competencies

• Participate in workplace communication
• Work in team environment
• Practice career professionalism
• Practice occupational health and safety procedures

Common Competencies

• Use Hand Tools
• Apply Quality Standards
• Perform Computer Operations

Core Competencies

• Set up back-end operations workplace for electronics production line
• Analyze, carry-out and monitor back-end operations for electronics production line
• Check quality

Career Opportunity

A person who has achieved this qualification is competent to work as an Electronics Back-end Operator.

Training Duration

• 16 hrs – Basic Competencies
• 16 hrs – Common Competencies
• 48 hrs – Core Competencies

Total: 80 hrs

Qualifications

Trainees who wish to enroll in the course must meet the following requirements:

• Must have completed at least 10 years of basic education or possess an Alternative Learning Systems (ALS) Certificate of Achievement equivalent to Grade 10.
• Must be able to communicate effectively both orally and in writing.
• Must be able to perform basic mathematical computations.

Trainer Qualifications

• Must hold an Electronics Back-end Operations NC II certification
• Must have a TESDA Trainer’s Methodology Course certificate or pass the Train the Trainers internal certification
• Must have completed at least 2 years of college or a 2-year vocational course

These qualifications ensure trainers in electronics back-end operations have the technical knowledge and teaching skills to train effectively.

Electronics Front-of-line Operation NC II

The Electronics Front-of-Line (FOL) Operations NC II Qualification equips individuals with the skills needed to work in electronics production. It covers setting up the workplace, performing and monitoring FOL operations, and ensuring quality compliance.

Units of Competency

The units of competency comprising this qualification include the following:

Basic Competencies:

• Participate in workplace communication
• Work in team environment
• Practice career professionalism
• Practice occupational health and safety procedures

Common Competencies:

• Use hand tools
• Apply quality standards
• Perform computer operations

Core Competencies:

• Set up front-of-line (FOL) operations workplace for electronics production line
• Analyze, carry out, and monitor front-of-line (FOL) operations for electronics production line
• Check quality compliance of front-of-line (FOL) operations for electronics production line

Career Opportunity

A person who has achieved this qualification is competent to work as an Electronics Front-of-Line Operator.

Training Duration

• 16 hrs – Basic Competencies
• 16 hrs – Common Competencies
• 48 hrs – Core Competencies

Total: 80 hrs

Qualifications

To enroll in the course, trainees must meet the following requirements:

• Completed at least 10 years of basic education or hold an ALS certificate equivalent to Grade 10.
• Able to communicate effectively in both oral and written form.
• Able to perform basic math calculations.

Trainer Qualifications

• Must hold an Electronics Front-of-Line Operations NC II certificate.
• Must have a TESDA Trainer’s Methodology Course certificate or have passed the Train the Trainers certification.
• Must have completed at least 2 years of college or a 2-year vocational course.
• Must have at least 2 years of relevant industry experience.

These qualifications ensure trainers in the Electronics Front-of-Line Operations NC II course have the skills, knowledge, and experience to teach effectively.

Requirements

To enroll in this course, you will need the following documents:

• PSA Birth Certificate
• High School or College Diploma
• Certified True Copy of Official Transcript of Records or Form 137
• Certificate of Good Moral Character or GMRC
• 1 x 1 and/or 2 x 2 pictures

To obtain further details, please reach out to the enrollment site that aligns with your requirements. Kindly note that the criteria may vary.

Sample of Certificate of Completion

Frequently Asked Questions

1. What is the job outlook for Electronics Operations graduates?

A: TESDA Electronics Operations graduates have strong job prospects as electronic manufacturing jobs are projected to grow.

2. What are some potential career paths after completing TESDA Electronics Operations courses?

A: Graduates can pursue careers as electronics technicians, back-end or front-of-line operators, quality control inspectors, or production supervisors.

3. Are there any prerequisites for enrolling in TESDA Electronics Operations courses?

A: Trainees must have completed at least 10 years of basic education or hold an Alternative Learning System (ALS) certificate equivalent to Grade 10.

4. Can I enroll in both the back-end and front-of-line operations NC II courses?

A: Yes, you can enroll in both courses as they cover different sets of skills needed for electronics production.

5. What are some important skills needed for working in the electronics production industry?

A: Some key skills for success in this field include technical knowledge, attention to detail, problem-solving abilities, teamwork, communication, and adaptability.

6. Are TESDA Electronics Operations courses only available in the Philippines?

A: While TESDA is a Philippine-based institution, there may be international partners or accredited training centers that offer these courses outside of the country. Interested individuals can check with their local TESDA offices for more information.

7. Can I pursue further education after completing a TESDA Electronics Operations course?

A: Yes, graduates can continue their education and pursue a degree in engineering or other related fields to further enhance their knowledge and career opportunities.

Also read: TESDA Refrigeration and Air-conditioning (RAC) Servicing Courses

Video: TESDA Online Program Courses Paano Mag Enroll, Mag Register At Kumuha Ng Kurso (Tagalog)

If you are interested in expanding your knowledge and skills, TESDA offers a wide range of online courses through their TESDA Online Program (TOP). This program aims to make technical-vocational education and training more accessible to Filipinos, especially those who are unable to attend traditional classroom-based trainings.

In this video, you will learn how to enroll, register and take courses in TESDA Online Program with the use of their official website.

Summary

TESDA Electronics Operations courses provide individuals with the necessary skills and qualifications to enter the thriving electronics production industry. With a variety of courses available, graduates have a wide range of career paths to choose from. Through TESDA’s training programs, individuals can develop the skills and knowledge needed to succeed in this growing field. So if you are interested in pursuing a career in electronics production, consider enrolling in TESDA Electronics Operations course.