TESDA offers a variety of courses in the electrical installation and maintenance field, providing individuals with the necessary skills and knowledge to succeed in this industry. These courses range from basic qualifications such as NC II to more advanced levels like NC III and IV.
Also read: TESDA Masonry Courses
In addition, TESDA now offers an online program for Electrical Installation and Maintenance NC II, making it more accessible for aspiring electricians.
Benefits
Here are some of the benefits of taking Electrical Installation and Maintenance courses by TESDA:
- Acquiring in-demand skills – The demand for skilled electricians is continuously increasing, making it a great career choice. By enrolling in TESDA courses, you will gain the necessary skills and knowledge that are currently in demand in this field.
- Hands-on learning experience – TESDA courses include practical training, allowing students to apply their learnings in real-life scenarios. This hands-on approach ensures that students are well-prepared for the actual job and have the necessary skills to succeed in their chosen career.
- Opportunity for career advancement – TESDA courses cover various levels, from basic qualifications to more advanced ones. This provides individuals with the opportunity to continuously develop their skills and advance in their careers as they progress through different levels of training.
- Certification – By completing TESDA courses, students will receive a nationally-recognized certificate that serves as proof of their competency in electrical installation and maintenance. This can open up more employment opportunities both locally and internationally.
Electrical Installation and Maintenance NC II
The Electrical Installation and Maintenance NC II Qualification includes skills needed to install and maintain electrical wiring, lighting, and related systems in residential buildings where the voltage is under 600 volts.
Units of Competency
To boost performance, it’s crucial to develop key skills in various areas.
BASIC COMPETENCIES
- Participate in workplace communication
- Work in a team environment
- Practice career professionalism
- Practice occupational health and safety procedures
COMMON COMPETENCIES
- Use Hand Tools
- Perform Mensuration and Calculation
- Prepare and Interpret Technical Drawing
- Apply Quality Standards
- Terminate and Connect Electrical Wiring and Electronic Circuits
CORE COMPETENCIES
- Perform roughing-in activities, wiring and cabling works for single-phase distribution, power, lighting and auxiliary systems
- Install electrical protective devices for distribution, power, lighting, auxiliary, lightning protection and grounding systems
- Install wiring devices of floor and wall-mounted outlets, lighting fixtures/switches, and auxiliary outlets
Career Opportunities
A person with this Qualification is competent to be:
- Building-Wiring Electrician
- Residential/Commercial-Wiring Electrician
- Maintenance Electrician
Training Duration
- Basic: 18 hours
- Common: 24 hours
- Core: 154 hours
Total: 196 hours
Qualifications
This section outlines trainee qualifications, including education and experience. To qualify as a trainee for Electrical Installation & Maintenance NC II, candidates must meet the following requirements:
- Must have completed at least 10 years of basic education or hold an ALS certificate of achievement equivalent to grade 10.
- Must communicate effectively both orally and in writing.
- Must be able to perform basic math computations.
The list does not include institutional requirements like education, work experience, or other trainee criteria set by the school or training center providing the TVET program.
Electrical Installation and Maintenance NC II Online Course
The Electrical Installation and Maintenance NC II online course from the Tesda Online Program provides essential skills for installing and maintaining electrical systems. Ideal for those in the construction industry or aspiring electricians, this course covers installation, testing, and maintenance of electrical systems up to 600 volts in residential buildings. Completing this course can enhance job prospects and career growth in the electrical field.
Modules
Module 1: Introduction to Electrical Installation and Maintenance
UNIT 1: Overview of Electrical Installation and Maintenance
- Lesson 1: The Electrical Installation and Maintenance Industry
- Lesson 2: Importance of Relevant Laws and Ordinances
- Lesson 3: Occupational Health and Safety Policies and Procedures
By the end of this unit, the learner must be able to:
- Define the roles and duties of an electrician
- Explain the influence of EIM in the Industry
- Identify the importance of the relevant laws and ordinances
- Practice the Occupational Health and Safety Policies and Procedures
UNIT 2: Working in the Industry
- Lesson 1: Communication in the Workplace
- Lesson 2: Maintaining Professional Growth and Development
- Lesson 3: Entrepreneurial Skills and Values In the Workplace
By the end of this unit, the learner must be able to:
- Obtain and convey workplace information
- Work as a team member
- Identify and recommend solutions to routine problems
- Develop career and life decisions
- Contribute to workplace and community innovation
- Apply entrepreneurial best practices
UNIT 3: Fundamentals of Electrical Installation and Maintenance
- Lesson 1: Basic Concepts of Electricity
- Lesson 2: Different Electrical Tools and Equipment
- Lesson 3: Mensuration and Calculations
- Lesson 4: Interpreting Technical Drawing
- Lesson 5: Applying Quality Standards
- Lesson 6: Checking and Testing of Wires and Cable Layout
- Lesson 7: Documentation and Reporting
By the end of this unit, the learner must be able to:
- Understand the basic concept of electricity
- Differentiate electrical tools and equipment used in wiring installation
- Perform mensuration and calculations
- Interpret technical drawings and plans
- Identify different sizes of wires and cables.
Module 2: Performing Roughing-In Activities, Wiring and Cabling Works for Single-Phase Distribution, Power, Lighting and Auxiliary Systems
UNIT 1: Installing Electrical Metallic/Non-metallic (PVC) Conduits
- Lesson 1: Electrical Conduits
- Lesson 2: Conduit Bending
- Lesson 3: Conduit Fittings, Adapters, Elbow and Connectors/Couplers
By the end of this unit, the learner must be able to:
- Identify the correct conduit and conduit fittings by PEC provisions;
- Select tools and equipment according to job requirements;
- Perform correct conduit installation procedures according to job requirements; and
- Value safety procedures in installing electrical conduits.
UNIT 2: Installing Wireways and Cable Trays
- Lesson 1: Selecting Electrical Wire Ways and Cable Trays
- Lesson 2: Installing Raceways
By the end of this unit, the learner must be able to:
- Identify the correct raceway by PEC provisions;
- Use standard tools in installing wireways and cable trays;
- Perform correct raceway installation procedures according to job requirements; and
- Value safety procedures in installing electrical raceways.
UNIT 3: Installing an Auxiliary Terminal Cabinet and Distribution Panel
- Lesson 1: Installing Service Equipment
- Lesson 2: Installing Panelboards/Distribution Boards
- Lesson 3: Installing Auxiliary Terminal Cabinets
By the end of this unit, the learner must be able to:
- Prepare and use standard tools and equipment needed in installing auxiliary terminal cabinets and distribution panels;
- Identify PEC/NEC provisions on auxiliary terminal cabinets and distribution panels;
- Apply procedures in installing auxiliary terminal cabinets and distribution panels; and
- Value safety procedures in installing auxiliary terminal cabinets and distribution panels.
- Installing Electrical Protective Devices for Distribution, Power, Lightning Protection and Grounding Systems
UNIT 4: Performing Wiring and Cabling Layout
- Lesson 1: Electrical Wires and Cables
- Lesson 2: Wires and Cable Layout
By the end of this unit, the learner must be able to:
- Identify wires and cables;
- Comply with PEC/NEC provisions on wiring and cabling layout
- Apply methods in cable layout, pulling, splicing, and termination of wires
- Follow procedures in bending radius and loop tolerances for cables
- Value safety procedures in performing wiring and cabling layout
Module 3: Installing Electrical Protective Devices for Distribution, Power, Lightning Protection and Grounding Systems
UNIT 1: Installing Electrical Protective Devices
- Lesson 1: Installing Electrical Protective Devices
- Lesson 2: Testing Electrical Protective Devices
By the end of this unit, the learner must be able to:
- Follow safety procedures in accordance with job requirements;
- Follow the guidelines on installing electrical protective devices based on the Philippine Electrical Code (PEC);
- Identify the types and uses of protective devices;
- Perform the correct procedures for the installation of electrical protective devices in line with job requirements and PEC;
- Follow the schedule of work to ensure work is completed in an agreed time, to a quality standard, and with minimum waste;
- Seek further instructions from a supervisor if unplanned events or conditions occur; and
- Perform ongoing checks of the quality of work in accordance with instructions and requirements.
UNIT 2: Installing Lightning Protection and Grounding Systems
- Lesson 1: Defining Lightning Protection and Grounding Systems
- Lesson 2: Installing Lightning Protection and Grounding Systems
By the end of this unit, the learner must be able to:
- Explain the purpose of Lightning Protection and Grounding Systems
- Identify the types of Lightning Protection and Grounding Systems and their functions
- Follow the procedure for installing Lightning Protection and Grounding Systems
Module 4: Installing Wiring Devices for Floor and Wall Mounted Outlets, Lighting Fixtures, Switches and Auxiliary Outlets
UNIT 1: Installing Lighting Fixtures/Luminaires and Switches
- Lesson 1: Installing Lighting Fixtures/Luminaires & Switches
- Lesson 2: Functional Testing & Troubleshooting of Lighting Fixtures/Luminaires and Switches
By the end of this unit, the learner must be able to:
- Apply different methods and techniques in installing lighting fixtures and switches;
- Perform the installation economically;
- Select and perform the installation of lighting fixtures and switches according to the PEC guidelines;
- Follow the schedule of work to ensure work is completed in an agreed time, to a quality standard, and with minimum waste;
- Seek further instructions from a supervisor if unplanned events or conditions occur; and
- Undertake ongoing checks of the quality of work in accordance with instructions and requirements.
UNIT 2: Installing Auxiliary Outlets
- Lesson 1: Installing Floor and Wall Mounted Outlets
- Lesson 2: Installing Auxiliary Outlets
- Lesson 3: Functional Testing and Configuration of Auxiliary Outlets
By the end of this unit, the learner must be able to:
- Apply different methods and techniques in installing auxiliary outlets;
- Perform the installation economically;
- Select and perform the installation of auxiliary outlets based on the PEC guidelines;
- Follow the schedule of work to ensure work is completed in an agreed time, to a quality standard, and with minimum waste;
- Seek further instructions from a supervisor if unplanned events or conditions occur; and
- Undertake ongoing checks of the quality of work in accordance with instructions and requirements.
Note: Upon completion of each module, or specific modules, you will be awarded a certificate to recognize your achievements and demonstrate your expertise in the respective subject matter. These certificates serve as a testament to your dedication and commitment to continuous learning.
Electrical Installation and Maintenance NC III
The Electrical Installation & Maintenance NC III qualification includes the skills needed to earn a national certificate as specified by TESDA. It does not cover the core technical skills required for specialized roles like linemen, substation technicians, or electrical motors/generators repair technicians.
Units of Competency
To boost performance, it’s crucial to develop key skills in various areas.
BASIC COMPETENCIES
- Lead workplace communication
- Lead small teams
- Develop and practice negotiating skills
- Solve problems related to work activities
- Use mathematical concepts and techniques
- Use relevant technologies
COMMON COMPETENCIES
- Use Hand Tools
- Perform Mensuration and Calculation
- Prepare and Interpret Technical Drawing
- Apply Quality Standards
- Terminate and Connect Electrical Wiring and Electronic Circuits
- Maintain tools and equipment
CORE COMPETENCIES
- Perform roughing-in and wiring activities for three-phase distribution system for power, lighting, and motor control panel.
- Perform installation of data measurement and control system on electrical and auxiliary equipment
- Install, assemble, test and maintain motor control system.
Career Opportunities
A person with this Qualification is competent to be:
- Industrial Electrician
- Electrical Leadman
- Electrical Foreman
Training Duration
- Basic Competencies: 32 hours
- Common Competencies: 32 hours
- Core Competencies: 96 hours
Total Course Duration: 160 hours
Qualifications
Trainees wanting to join the course should meet these requirements:
- Hold or have completed training in Electrical Installation and Maintenance NC II or Mechatronics Servicing NC II
Note: This list excludes specific requirements like educational attainment or work experience that may be set by the school or training center offering the TVET program.
Electrical Installation and Maintenance NC IV
The Electrical Installation & Maintenance NC IV qualification includes skills a candidate must master to earn a national certificate, according to TESDA requirements. This qualification does not cover the specialized skills needed for jobs like linemen, substation technicians, or electrical motors/generators repair technicians.
Units of Competency
In order to enhance performance, it is imperative to cultivate fundamental skills across various domains.
Basic Worker Units of Competency
- Lead in utilizing specialized communication skills.
- Assist in developing teams and individuals.
- Apply problem-solving techniques in the workplace.
- Collect, analyze and organize information.
- Plan and organize work for several working teams.
- Promote environmental protection
Common Construction Industry Units of Competency
- Supervise the preparation of construction materials, tools and equipment for assigned tasks.
- Ensure compliance with standard procedures, specifications and manuals of instructions.
- Interpret and follow technical drawings and plans.
- Supervise mensuration and related computations.
- Supervise proper use and maintenance of tools and equipment.
Core Electrical Units of Competency
- Prepare Electric and hydraulic tools.
- Perform roughing-in and wiring for activities for bus and underfloor ducts.
- Perform installation of wiring devices for floor and ground fault current interrupting outlets.
- Perform installation of standard electrical protection system for lightning and grounding.
- Perform installation of electrical lighting systems, auxiliary outlets and lighting fixtures.
- Perform installation of data measurement and control system on electrical and auxiliary equipment.
- Assemble and install electrical lighting and motor control systems.
- Perform maintenance and troubleshooting works.
- Supervise/Monitor installation and maintenance on electrical systems, auxiliary including control, lighting, power and protection equipment.
- Perform commissioning of electrical equipment/system.
- Perform programming and installation of basic PLC systems.
Career Opportunities
A person with this Qualification is competent to be:
- Electrical Foreman
- Electrical Supervisor
- Supervising Technician
Training Duration
- Basic: 20 hours
- Common: 32 hours
- Core: 464 hours
Total: 516 hours
Qualifications
To qualify as a trainee for Electrical Installation & Maintenance NC IV, a candidate must be:
- Holder of Electrical Installation & Maintenance NC III or equivalent experience and training.
- Can communicate both verbally and in writing.
- Physically and mentally fit
- With good moral character
- Can do basic math.
This list does not include institutional requirements like education, work experience, or other criteria set by the training center or school delivering the TVET program.
Sample of Certificate of Completion
Requirements
To enroll, you will need the following documents:
- PSA Birth Certificate
- High School or College Diploma
- Certified True Copy of Official Transcript of Records or Form 137
- Certificate of Good Moral Character or GMRC
- 1 x 1 and/or 2 x 2 pictures
To obtain further details, please reach out to the enrollment site that aligns with your requirements. Kindly note that the criteria may vary.
Video: Electrical Installation and Maintenance NC-II
This video provides a brief overview of the Electrical Installation and Maintenance NC-II course. They demonstrate their knowledge and proficiency in installing, repairing, and maintaining electrical equipment, systems, and networks. If you want to become a certified electrician or enhance your skills in the electrical field, this course is perfect for you.
Summary
The Electrical Installation and Maintenance courses teach essential skills in communication, problem-solving, math, and technology. These courses include Basic, Common, and Core competencies to meet industry standards. Training lasts from 160 hours (NC II) to 516 hours (NC IV). Candidates must meet qualifications and provide required documents. Graduates can become Industrial Electricians, Electrical Foremen, or Supervising Technicians.
Contact Information
Technical Education and Skills Development Authority (TESDA)
Office Address: BLDG 8, TESDA Gate 2, TESDA Complex, East Service Rd., South Superhighway, Taguig, Metro Manila.
Email Address: contactcenter@tesda.gov.ph
Telephone Number: 8887-7777
SMS Hotline: 0917-479-4370 (text only)
Website: https://www.tesda.gov.ph/
Facebook Page: https://www.facebook.com/TESDAOfficial