Flux-Cored Arc Welding (FCAW) is a welding process that uses a continuously fed consumable tubular electrode filled with flux to create the weld. This process offers many advantages such as high deposition rates, easy operation, good penetration, and ability to weld thick materials. TESDA recognizes the importance of FCAW in various industries and offers courses for aspiring welders to develop their skills in this particular welding technique.
Also read: TESDA Shielded Metal Arc Welding (SMAW) Courses
There are 3 qualifications available in TESDA for Flux-Cored Arc Welding: NC I, NC II, and NC III. Each qualification builds upon the skills and knowledge acquired from the previous one, allowing welders to progress in their careers.
Benefits
Here are some of the benefits of enrolling in Flux-Cored Arc Welding Courses by TESDA:
- Gain industry-standard skills: FCAW courses teach essential welding competencies like working with carbon steel, reading blueprints, and using FCAW equipment.
- Expand job opportunities: FCAW certification opens doors to careers in construction, manufacturing, shipbuilding, and more, where skilled welders are in high demand.
- Advance your education: After completing FCAW NC I-III, you can pursue higher-level courses like NC IV, enhancing skills and career prospects.
- Earn more income: TESDA certification boosts earning potential, with opportunities for higher salaries and freelance work as you gain expertise.
- Ensure workplace safety: TESDA emphasizes safety, preparing individuals to prevent accidents and maintain efficient, productive work environments.
- Personal growth: FCAW courses build technical skills, problem-solving abilities, and values like professionalism, benefiting both work and daily life.
Flux-Cored Arc Welding (FCAW) NC I
The FCAW NC I Qualification covers the skills needed to weld carbon steel plates based on layouts, blueprints, diagrams, work orders, welding procedures, or instructions, using FCAW welding equipment.
Units of Competency
The Units of Competency comprising this qualification include the following:
BASIC COMPETENCIES
- Receive and Respond to Workplace Communication
- Work with Others
- Demonstrate Work Values
- Practice Basic Housekeeping Procedures
COMMON COMPETENCIES
- Apply Safety Practices
- Interpret Drawings and Sketches
- Perform Industry Calculations
- Contribute to Quality System
- Use Hand Tools
- Prepare Weld Materials
- Setup Welding Equipment
- Fit up Weld Materials
- Repair Welds
CORE COMPETENCIES
- Weld Carbon Steel Plates Using FCAW
Career Opportunity
A person with this Qualification is competent to:
- Plate Welder (FCAW)
Training Duration
- Basic: 28 hours
- Common: 56 hours
- Core: 72 hours
Assessment Methods
- Written examination
- Demonstration of practical skills
- Direct observation
- Interview
Course Delivery
- Modular
- Demonstration
- Lecture/Discussion
- Dual training
Qualifications
To enroll in this course, applicants should meet the following qualifications:
- Completed SMAW NC I training or hold an SMAW NC I certification
- Able to communicate effectively in both oral and written forms
- Physically and mentally fit
- Able to perform basic mathematical calculations
Flux-Cored Arc Welding (FCAW) NC II
The FCAW NC II Qualification equips individuals with the skills to weld carbon steel pipes based on layouts, blueprints, or instructions using FCAW equipment. This qualification aligns with AWS D1.1, ASME IX, API 1104, and ISO 9606-1 standards.
Units of Competency
The Units of Competency comprising this qualification include the following:
BASIC COMPETENCIES
- Participate in workplace communication
- Work in team environment
- Practice career professionalism
- Practice occupational health and safety procedures
COMMON COMPETENCIES
- Apply Safety Practices
- Interpret Drawings and Sketches
- Perform Industry Calculations
- Contribute to Quality System
- Use Hand Tools
- Prepare Weld Materials
- Setup Welding Equipment
- Fit up Weld Materials
- Repair Welds
CORE COMPETENCY
- Weld Carbon Steel Pipes Using FCAW
Career Opportunities
A person with this Qualification is competent to:
- Plate Welder (FCAW)
- Pipe Welder (FCAW)
Training Duration
- Basic: 18 hours
- Common: 56 hours
- Core: 194 hours
Total: 268 hours
Assessment Methods
- Written examination
- Demonstration of practical skills
- Direct observation
- Interview
Course Delivery
- Modular
- Demonstration
- Lecture/discussion
- Dual training
Qualifications
Candidates/trainees must have one of the following qualifications:
- Able to communicate verbally and in writing
- Can perform basic math
- Completed FCAW NC I training or holds FCAW NC I certification
- Physically and mentally fit
Flux-Cored Arc Welding (FCAW) NC III
The FCAW NC III Qualification trains individuals to weld alloy steel plates and pipes using FCAW equipment based on layouts, blueprints, or instructions. It complies with AWS D1.1, ASME IX, API 1104, and ISO 9606-1 welding standards.
Units of Competency
The Units of Competency comprising this qualification include the following:
BASIC COMPETENCIES
- Lead workplace communication
- Lead small teams
- Develop and practice negotiation skills
- Solve problems related to work activities
- Use mathematical concepts and techniques
- Use relevant technologies
COMMON COMPETENCIES
- Apply Safety Practices
- Interpret Drawings and Sketches
- Perform Industry Calculations
- Contribute to Quality System
- Use Hand Tools
- Prepare Weld Materials
- Setup Welding Equipment
- Fit up Weld Materials
- Repair Welds
CORE COMPETENCIES
- Weld Alloy Steel Plates Using FCAW
- Weld Alloy Steel Pipes Using FCAW
Career Opportunities
A person with this Qualification is competent to:
- Plate Welder (FCAW)
- FCAW Plate Welder (Alloy Steel)
- Pipe Welder (FCAW)
- FCAW Pipe Welder (Alloy Steel)
Training Duration
- Basic: 20 hours
- Common: 56 hours
- Core: 72 hours
Total: 148 hours
Assessment Methods
- Written examination
- Demonstration of practical skills
- Direct observation
- Interview
Course Delivery
- Modular
- Demonstration
- Lecture
- Discussion
- Dual training
- Distance learning
Qualifications
Candidates/trainees must possess one of these qualifications:
- Able to communicate verbally and in writing
- Can do basic math
- Completed FCAW NC II training or hold a FCAW NC II certificate
- Physically and mentally fit
Regularly check for updated course requirements. Investing in FCAW training boosts career growth—keep learning to excel in welding!
Sample of Certificate of Completion
Requirements
To enroll in this course, you will need the following documents:
- PSA Birth Certificate
- High School or College Diploma
- Certified True Copy of Official Transcript of Records or Form 137
- Certificate of Good Moral Character or GMRC
- 1 x 1 and/or 2 x 2 pictures
To obtain further details, please reach out to the enrollment site that aligns with your requirements. Kindly note that the criteria may vary.
Also read: TESDA Manual Metal Arc Welding (MMAW) Courses
Summary
FCAW training programs teach you to weld carbon and alloy steel plates and pipes using industry-standard equipment. These qualifications open doors to various welding jobs, with opportunities for growth through advanced courses. Enroll now to boost your skills and stay competitive!